Water Filtration Units

Our filtration units are designed to fit into any type of decor.

Our units range from simple models up to attractive stainless steel models to suit the most upmarket of environments.

Chilled, hot or ambient temperature water is dispensed to meet all your requirements.

A filtration unit may be a more cost effective option than using bottled water, particularly in situations where large amounts of water are consumed each day or where space is limited for the storage of bottles.

Because Alpha deals in both filtration and spring water services, we can help you review the costs and benefits of each choice and work out the solution that will suit you best. 


COLD WATER RESERVOIR
All dispensers have stainless steel tanks that hold approximately 1.8 litres of chilled water during normal usage. Each has a chilling capacity of 5 l.p.h. during peak periods.
HOT WATER RESERVOIR
The stainless steel hot water tank is fitted with a high performance 575-watt band heater. This model delivers 50 cups (150ml) of hot water per hour at approximately 900C. Hot tanks have drains fitted for easy cleaning and sanitisation. It is very easy to remove for service if required. Each tank has its components swaged together. As no fusion welding is used, the occurrence of pitting, crevice or galvanic corrosion is prevented.
REFRIGERATION
The system uses 40gms of R134a refrigerant, which is non-toxic, non-flammable and is environmentally friendly. A capillary tube, which has no moving parts, controls refrigerant flow.
TEMPERATURE CONTROL
A factory pre-set thermostat controls the temperature of water in the cold tank. The water temperature in the hot tank is controlled by a mechanical thermostat set to approximately 850C.
COMPRESSOR
1/16 h.p. capacity 49 watts. The compressor is hermetically sealed for silent running.
CONDENSER
All steel tube and wire construction.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied.
PERFORMANCE
To ARI 1010-94 Standard
WEIGHT-PACKED
RP2 – 15kg
RP3 – 16kg
DIMENSIONS
Width - 370mm Container Capacity
Depth - 320mm 20ft - 216 units
Height - 970mm 40ft - 430 units



COLD WATER RESERVOIR
All dispensers have stainless steel tanks that hold approximately 1.8 litres of chilled water during normal usage. Each has a chilling capacity of 5 l.p.h. during peak periods.
HOT WATER RESERVOIR
The stainless steel hot water tank is fitted with a high performance 575-watt band heater. This model delivers 50 cups (150ml) of hot water per hour at approximately 900C. Hot tanks have drains fitted for easy cleaning and sanitisation. It is very easy to remove for service if required. Each tank has its components swaged together. As no fusion welding is used, the occurrence of pitting, crevice or galvanic corrosion is prevented.
REFRIGERATION
The system uses 40gms of R134a refrigerant, which is non-toxic, non-flammable and is environmentally friendly. A capillary tube, which has no moving parts, controls refrigerant flow.
TEMPERATURE CONTROL
A factory pre-set thermostat controls the temperature of water in the cold tank. The water temperature in the hot tank is controlled by a mechanical thermostat set to approximately 850C.
COMPRESSOR
1/16 h.p. capacity 49 watts. The compressor is hermetically sealed for silent running.
CONDENSER
All steel tube and wire construction.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied.
PERFORMANCE
To ARI 1010-94 Standard
WEIGHT-PACKED
RP2 – 15kg
RP3 – 16kg
DIMENSIONS
Width - 370mm Container Capacity
Depth - 320mm 20ft - 216 units
Height - 970mm 40ft - 430 units



COLD WATER RESERVOIR
All dispensers have stainless steel tanks that hold approximately 1.8 litres of chilled water during normal usage. Each has a chilling capacity of 5 l.p.h. during peak periods.
HOT WATER RESERVOIR
The stainless steel hot water tank is fitted with a high performance 575-watt band heater. This model delivers 50 cups (150ml) of hot water per hour at approximately 900C. Hot tanks have drains fitted for easy cleaning and sanitisation. It is very easy to remove for service if required. Each tank has its components swaged together. As no fusion welding is used, the occurrence of pitting, crevice or galvanic corrosion is prevented.
REFRIGERATION
The system uses 40gms of R134a refrigerant, which is non-toxic, non-flammable and is environmentally friendly. A capillary tube, which has no moving parts, controls refrigerant flow.
TEMPERATURE CONTROL
A factory pre-set thermostat controls the temperature of water in the cold tank. The water temperature in the hot tank is controlled by a mechanical thermostat set to approximately 850C.
COMPRESSOR
1/16 h.p. capacity 49 watts. The compressor is hermetically sealed for silent running.
CONDENSER
All steel tube and wire construction.
ELECTRICAL
240 volts, 50Hz. A 2 metre house cable and 3 pin plug are supplied.
PERFORMANCE
To ARI 1010-94 Standard
WEIGHT-PACKED
RP2 – 15kg
RP3 – 16kg
DIMENSIONS
Width - 370mm Container Capacity
Depth - 320mm 20ft - 216 units
Height - 970mm 40ft - 430 units



Alpine


The Waterworks Alpine Series water coolers are mains pressure, drain free units which provide a cost effective means of supplying Cool & Hold or Hot and Cold water without the hassle of storing and changing spring water bottles.They are also ideally suited to the addition of filtration systems.

• Mains pressure (Drain – Free)
• Available as Cool & Cold or Hot & Cold.
• Stainless steel cooling reservoir.
• Accommodates a variety of water purifiers.
• Optional bottle-top conversion kit also available.
• Dimensions 315mm (W) x 320mm (D) x 1020mm (H)



D7


The Waterworks D7 Series water coolers are mains pressure, drain free units which provide a cost effective means of supplying Cool & Hold or Hot and Cold water without the hassle of storing and changing spring water bottles. They are also ideally suited to the addition of filtration systems.

• Mains pressure (Drain – Free)
• Available as Cool & Cold or Hot & Cold.
• Stainless steel cooling reservoir.
• Accommodates a variety of water purifiers.
• Optional bottle-top conversion kit also available.
• Dimensions 320mm (W) x 320mm (D) x 1000mm (H)



D5


The Waterworks D5 Series water coolers are Australia’s number one selling, mains pressure, drain free units.  Preferred by the filtration industry because of their build quality, reliability and their huge, 12 litre cooling reservoir, they provide a cost effective means of supplying Cool & Hold or Hot and Cold water without the hassle of storing and changing spring water bottles.  They are also ideally suited to the addition of filtration systems.

• Mains pressure (Drain-Free)
• Available in Cool & Cold or Hot & Cold.
• Approximately 5 litres per hour cooling performance.
• Child resistant safety tap for hot water units.
• Matching cup dispensers available.
• Bench Top versions (SD5) also available
• Dimensions 310mm (W) x 310mm (D) x 1040mm (H)



Summit


The Waterworks Summit Series water coolers are our “boutique” mains pressure, drain free units. The stainless steel cabinet has a level of sophistication that will compliment the modern home or office, while providing a cost effective means of supplying Cool & Hold or Hot and Cold water without the hassle of storing and changing spring water bottles. They are also ideally suited to the addition of filtration systems.

• Mains pressure (Drain-Free)
• Stainless steel cabinet
• Available in Cool & Cold or Hot & Cold.
• Approximately 5 litres per hour cooling performance.
• Child resistant safety tap for hot water units.
• Optional bottle top conversion kit also available.
• Dimensions 310mm (W) x 310mm (D) x 1060mm (H)


Call the team at Alpha Water today on 02 9518 3544 to arrange a FREE site evaluation at your premises.

Pure Spring Water

Water Bottle Recycle

Water Filtration Units

Send us an email

Name:

Phone:

Email:

Your Enquiry:

Google Advertising | Internet Marketing | Web Design Sydney